Home chevron_right Products chevron_right Well Wizard® Zero™ and Clear™ PFAS-Free Dedicated Groundwater Sampling Systems

Well Wizard® Zero™ and Clear™ PFAS-Free Dedicated Groundwater Sampling Systems

Well Wizard® ZERO™ and Clear™ Bladder Pumps: The Original, Low-Flow Sampling Standard Providing PFAS-Free Performance
Request a quote
Product Description
Specification
Downloads
Product Description
add remove

The Well Wizard® ZERO™ and Clear™ dedicated bladder pump systems from QED give you the high sample accuracy and proven reliability of our standard Well Wizard pumps in a PFAS-free configuration that meets PFAS sampling program requirements and regulatory guidance. Based on our P1100 Series bladder pumps that have been in use for nearly 40 years, the ZERO and Clear models are constructed of materials that have been tested for PFAS leaching in water at the lowest available laboratory detection and reporting limits for 24 PFAS compounds.*

Key Specifications
  • EPA-accepted low-flow sampling accuracy.
  • ZERO models are made entirely without fluoropolymers
  • Clear models use QED’s long-life DuraFlex PTFE bladder
  • Fits into 2” ID (50MM) and larger well casings and can be installed to depths of 600 feet (183 m)
  • ZERO models covered by QED 5 year sampling pump warranty
  • Clear models covered by QED 10 year sampling pump warranty
Benefits
  • Sample from nearly unlimited depths using optional drop tube inlet tubing and weight kits
  • Clear models are tested and certified to be PFAS-free
  • ZERO models use a proprietary fluorine-free bladder developed by QED to provide exceptional flex life of up to 50 years†
  • QED’s twin-bonded HDPE tubing meets PFAS sampling requirements and is tested for VOCs & SVOCs
Specification
add remove
Key Specifications
  • ZERO Pump materials: PVC body, inlet and discharge housings, and inlet screen; polypropylene or stainless steel fittings, proprietary fluorine-free bladder, acetal check balls, EPDM O-rings
  • Clear Pump materials: PVC body, inlet and discharge housings, and inlet screen; polypropylene or stainless steel fittings, PTFE bladder, acetal check balls, EPDM O-rings
  • Standard length models = 41.0” (104 CM)
  • Short body length models = 20.0” (50 cm)
  • Outside Diameter: 1.66” (42mm)
  • Fitting Type: Standard pressure = polypropylene compression type / High pressure = stainless steel compression type
  • Tubing Diameter: Standard length models = 3/8” OD + 1/4" OD twin-bonded discharge and air supply tubing / Short body models = 1/4” OD + 1/4" OD twin-bonded discharge and air supply tubing
  • Inlet Housing Thread Diameter: 3/8” Female NPT
  • Bladder Volume: Standard length = 395 ml (13.4 oz, 0.10 gal) / Short body = 130 ml (4.4 oz, 0.03 gal)
  • Maximum operating pressure: 300 PSI (20.7 bar, 2,068 kPa)
  • Maximum lift depth: 600 feet (183m)
Downloads
add remove
Well Wizard® Zero™ and Clear™ PFAS-Free Dedicated Groundwater Sampling Systems Downloads
Product Data Sheets & Specifications
Specs and Drawings
Product Manuals & Drawings
Technical Papers
Related Downloads
Download Selected Files
Download All Files

Certifications

Well Wizard bladder pumps tested under the US EPA's Environmental Technology Verification (ETV) program were demonstrated to be highly accurate and precise for sampling a range of VOCs. Scan the QR code to access the ETV Verification Statement and full EPA ETV report.

Product Support

Need support for the Well Wizard® Zero™ and Clear™ PFAS-Free Dedicated Groundwater Sampling Systems?

Related Products

Well Wizard Dedicated Groundwater Sampling Systems

Well Wizard® bladder pumps for MicroPurge® low-flow pump groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities.

Snap Sampler

The Snap Sampler® System reduces sampling costs while providing high sample quality and accuracy.

MicroPurge MP10 Digital Controller

MicroPurge MP15 Backpack Controller




Get in Touch

Ready to take control of your environmental monitoring? Get in touch with QED today.

close
close